TÜBİTAK's 1507 SME R&D Start-up Support Program (KOBİ Ar-Ge Başlangıç Destek Programı) gives grants to R&D projects of SME-scale capital companies based in Türkiye: budgets up to 3,500,000 TRY at a 75% support rate. You apply to an open call in PRODİS once your company's pre-registration there is approved; the 2026-2 call closes on November 25, 2026, 23:59. This guide relies only on TÜBİTAK's official pages and documents.
What 1507 is and what it funds
1507 is run through calls by TEYDEB, TÜBİTAK's Technology and Innovation Support Programs Directorate. It aims to build SMEs' technology and innovation capacity. The support is a grant: it is not repaid.
It funds R&D projects that create a new product, develop or improve an existing one, raise product quality or standards, or develop cost-cutting techniques and new production technologies. Unless a call says otherwise there is no topic restriction; the 2026-2 call favors TÜBİTAK's 2026-2028 priority R&D and innovation topics.
Eligible costs: personnel, travel, tools, equipment, software and publications (not for production infrastructure), materials and consumables, consultancy and other services, and R&D services bought from R&D institutions. Projects whose R&D was finished before the application are not funded.
Sources: TÜBİTAK: 1507 SME R&D Start-up Support Program page (Turkish), overview, scope and FAQ; TÜBİTAK: 1507 2026 2nd call page; TÜBİTAK: 1507 2026-2 call text (with the extended calendar), section 4
Who can apply and who cannot
Only SME-scale capital companies based in Türkiye can apply. SME means micro, small and medium-sized enterprises as defined by the SME Regulation of May 25, 2023.
Not eligible: sole proprietorships (şahıs şirketleri), ordinary partnerships, cooperatives, unions, foundations, associations and their economic enterprises, and limited-tax-liability branches or offices of businesses based abroad. If a company was not in fact an SME on its application date, its project is canceled and payments are recovered with interest.
Prior support limit: a company's first five projects are supported, at least two of them partnered. Projects supported under TÜBİTAK's 1512 and 1812 programs do not count. SMEs with a Teknogirişim Rozeti (tech venture badge) are exempt from the partnering rule, but their partnered projects count toward the five. After five, TÜBİTAK points you to its other programs.
A company whose TEYDEB projects under evaluation plus those with a support decision total five cannot apply again unless one under evaluation is not supported. In the 2026-2 call a company can submit at most 2 proposals, counting its applications to the parallel 1501 2026-2 call.
Sources: TÜBİTAK: 1507 SME R&D Start-up Support Program page (Turkish), who can apply and FAQ; TÜBİTAK: 1507 implementation rules (Uygulama Esasları), articles 4 and 14; TÜBİTAK: 1507 2026-2 call text (with the extended calendar), section 7
Budget, support rate and project duration
The project budget is capped at 3,500,000 TRY and the support rate is 75%. The implementation rules set the rate at no more than 75% per period, and the rate for your project is stated in its support scope.
The grant is the amount accepted into the support scope multiplied by the support rate. The call announcement sets the support period, which cannot exceed 18 months per project.
SMEs founded under TÜBİTAK 1512, or that received Tech Venture Capital Support under Law No. 5746, get advantages on their first application, such as special assessment criteria, overhead of 10% of the budget and more than one advance payment.
Sources: TÜBİTAK: 1507 SME R&D Start-up Support Program page (Turkish), key points and FAQ; TÜBİTAK: 1507 implementation rules (Uygulama Esasları), articles 6 and 7
The 2026-2 call: calendar and status today
The 2nd call of 2026 (code 1507-2026-2) opened on July 20, 2026. Its original calendar set the pre-registration deadline at November 9 and the closing date at November 11, 2026; TÜBİTAK extended it in an announcement dated November 9, 2026. The same announcement extended the 2026 3rd call of 1707, a separate program for SMEs' order-based R&D projects.
Current calendar: pre-registrations or details updates that go to TÜBİTAK for approval are due by November 23, 2026, 23:59. The call closes on November 25, 2026, 23:59, the last day to send your proposal through PRODİS, and sending requires an approved pre-registration. TÜBİTAK's call page shows the same closing time, so the call is open on November 18, 2026.
If a system error blocks your application within the calendar, send a petition to TEYDEB by the end of the working day on December 2, 2026; later petitions are not considered.
According to the call page, 1507 opens two calls a year, in January and July.
Sources: TÜBİTAK announcement: 1507 and 1707 2026 calls extended (November 9, 2026); TÜBİTAK: 1507 2026-2 call text (with the extended calendar), sections 1 and 6 (call calendar); TÜBİTAK: 1507 2026 2nd call page; TÜBİTAK: 1507 2026-2 call text (original calendar), section 6
Before you apply: company pre-registration in PRODİS
Sending a proposal requires an approved company pre-registration (kuruluş bazlı ön kayıt) in PRODİS. Companies registered before November 2, 2026 must update their details, and in a partnered project each partner registers on its own.
Since November 2, 2026 the process is fully online: no printed documents go to TÜBİTAK, and the authorized signatory (kuruluş yetkilisi) needs an e-signature.
If you select signatories from MERSİS, approval is automatic after their e-signature; an authorization document for someone with limited authority or a power of attorney sends the pre-registration to TÜBİTAK for approval. In the 2026-2 call those that go to TÜBİTAK are due by November 23, 2026, 23:59, others by the call's closing. getfund's PRODİS pre-registration guide covers each step.
Sources: TÜBİTAK: 1507 2026-2 call text (with the extended calendar), section 6 and application process note; TEYDEB announcement: pre-registration goes online (November 2, 2026)
Step by step: applying in PRODİS
You can apply only while a call is open, online in PRODİS at eteydeb.tubitak.gov.tr; no fee is charged at any stage.
1. Log in as company user (Firma Kullanıcısı), press “Yeni Proje Önerisi Tanımla” (define new project proposal), name the project, choose the program and save. It stays a draft until you send it; you can work on it while pre-registration approval is pending.
2. Fill in section A1, Proje Ön Bilgileri (project preliminary information), and send it to the authorized signatory you selected for e-signature approval.
3. After approval, complete the other sections and press “TÜBİTAK'a GÖNDER” (send to TÜBİTAK) before the call closes; that date becomes your application date. Make sure the e-signature stays valid through the closing date, renewing it if needed.
4. Pick the start date: the first day of your application month or a later month; TÜBİTAK can change it and the duration after the evaluation.
Sources: TÜBİTAK TEYDEB: Project proposal form guide for the 1501 and 1507 calls (AGY100/AGY101), preliminary information; TÜBİTAK: 1507 SME R&D Start-up Support Program page (Turkish), application forms; TÜBİTAK TEYDEB: Frequently asked questions; TÜBİTAK: 1507 2026-2 call text (with the extended calendar), application process note; TÜBİTAK: 1507 implementation rules (Uygulama Esasları), articles 17 and 18; TÜBİTAK announcement: 1507 and 1707 2026 calls extended (November 9, 2026), important reminder
What the proposal form asks
You apply with the project proposal form (Proje Öneri Bilgileri Formu, AGY101), filled in online in PRODİS following TÜBİTAK's preparation guide. The AGY100 form on the program page is for draft work only and cannot be used to apply.
The form's parts: A. company details and project summary; B. industrial R&D content, technology level and innovative aspects (link to the call topic, measurable goals, solution approaches); C. project plan and company infrastructure (work plan, project management, infrastructure); D. economic benefit and national gains; E. risk and financing management; F. budget (personnel, travel, tools and software, R&D and test institutions, services and materials); G. attachments.
Write short and plain, explaining clearly the R&D activities and your company's contribution; if the information lacks detail, the evaluation is not started. You can attach an economic feasibility report (market research, market and competitor analyses, customer needs).
Sources: TÜBİTAK TEYDEB: Project proposal form guide for the 1501 and 1507 calls (AGY100/AGY101), contents and preliminary information; TÜBİTAK: 1507 SME R&D Start-up Support Program page (Turkish), application forms; TÜBİTAK: 1507 implementation rules (Uygulama Esasları), articles 17 and 23; TÜBİTAK: 1507 2026-2 call text (with the extended calendar), section 8
How evaluation works and how long it takes
Preliminary review: a TÜBİTAK project technical expert checks the proposal's content and form and may ask you to complete missing information and documents within a set time.
Referee review: expert referees, generally university academics, assess the proposal independently, with or without a company visit, and online if TÜBİTAK sees fit.
Three dimensions are scored: R&D content, technology level and innovation; project plan and company infrastructure; and the outputs' potential for economic benefit and national gains. In the 2026-2 call, an average referee score of 60 or lower in any dimension means rejection. Above that, extra points can be added: -5 to 5 for the commercialization record of past TÜBİTAK projects, and 5 for the priority topics “Endüstride Teknolojik Sıçrama” (technological leap in industry) or “Dijital Liderlik” (digital leadership), excluding green transformation topics.
Decision: the technology group's board of academics and industry representatives sets the project score from the referee reports; the final decision weighs score and call budget, and TÜBİTAK's Presidency approves it. A strong project that the proposal undersells can be opened for revision as a “geliştirilebilir proje” (improvable project).
Timing: the implementation rules aim for 60 days from a complete submission to the board's discussion, a target rather than a fixed date. A rejection comes with its reasons, and you can object to it.
Sources: TÜBİTAK: 1507 implementation rules (Uygulama Esasları), articles 19 and 23 to 25; TÜBİTAK TEYDEB: Project proposal form guide for the 1501 and 1507 calls (AGY100/AGY101), preliminary information; TÜBİTAK: 1507 SME R&D Start-up Support Program page (Turkish), evaluation and FAQ; TÜBİTAK: 1507 2026-2 call text (with the extended calendar), sections 5 and 7; TÜBİTAK: 1507 2026 2nd call page
What gets a proposal rejected or delayed
The call text lists critical findings (kritik tespitler): with one of them a proposal can be rejected without referee review, and one found after the referee review means rejection without board scoring.
The findings: R&D finished before the application; R&D done by a service provider, with no or limited company contribution; routine or outdated work; output that cannot become economic benefit or is not technically or legally feasible; investment in production infrastructure; no company employee on the team with at least a bachelor's degree related to the topic (for other degrees, experience in the CV is weighed); too little information to evaluate; costs that do not match the R&D or an unrealistic budget; a rejected proposal resubmitted without addressing the reasons.
Delays: a revision not made in the given time sends the proposal to the board with a rejection recommendation; without pre-registration approval you cannot send it; an e-signature expiring before the closing date must be renewed.
Sources: TÜBİTAK: 1507 2026-2 call text (with the extended calendar), section 5 (critical findings); TÜBİTAK: 1507 implementation rules (Uygulama Esasları), articles 19 and 24; TÜBİTAK announcement: 1507 and 1707 2026 calls extended (November 9, 2026), important reminder
After approval: contract and payments
If supported, you get a decision letter naming the support scope and project monitor, with the contract attached. Sign and return it within the given time, or TÜBİTAK can cancel the decision; a secure electronic signature works too.
Payment follows spending: you pay project costs first and submit the documents; after TÜBİTAK's evaluation the support goes to the bank account your company gave TÜBİTAK. The project runs in six-month periods starting January 1 and July 1, and each period's R&D support request form (AGY301) is due in PRODİS by the end of the second month after it. Certified public accountants (SMMM) or sworn financial advisors (YMM) review the expenses.
Advance payment (transfer ödemesi): once TÜBİTAK has signed the contract, you can request one against a letter of guarantee, a surety letter or bond, or a company-issued promissory note. In the first period it is capped at 30% of the total project budget in the support scope; none is paid when under three months of the project remain, and the company must have no tax or social security premium debt.
Sources: TÜBİTAK: 1507 implementation rules (Uygulama Esasları), articles 4, 25 to 27, 37 and 45; TÜBİTAK TEYDEB: Project proposal form guide for the 1501 and 1507 calls (AGY100/AGY101), preliminary information, support process; TÜBİTAK: Financial matters and payment (Mali Hususlar ve Ödeme), accountant reports and transfer payment
If you get stuck: contacts
The call text gives 1507@tubitak.gov.tr for problems and questions about the application process and system, and cagri.planlama@tubitak.gov.tr for questions about the priority R&D and innovation topics.
For project-specific or technical questions, contact the relevant technology group; TEYDEB's contact page lists each group's phone and email, such as bilteg.teydeb@tubitak.gov.tr for the Information Technologies Group.
TÜBİTAK's pre-registration guide gives prodis@tubitak.gov.tr for PRODİS software problems, teydeb.onkayit@tubitak.gov.tr for pre-registration questions and teydeb.eimzadestek@tubitak.gov.tr for obtaining an e-signature. For PRODİS help, the program page points to TEYDEB's FAQ page.
Sources: TÜBİTAK: 1507 2026-2 call text (with the extended calendar), section 9; TÜBİTAK: 1507 SME R&D Start-up Support Program page (Turkish), contact and FAQ; TÜBİTAK TEYDEB: Contacts; TÜBİTAK TEYDEB: Company pre-registration user guide (Kuruluş Bazlı Ön Kayıt Kullanıcı Kılavuzu), important reminder; TÜBİTAK TEYDEB: Frequently asked questions
How getfund helps
getfund does not do the PRODİS pre-registration or the 1507 project proposal for you: your company's PRODİS users do those steps, and the authorized signatory approves with their own e-signature.
getfund matches your startup profile against open TÜBİTAK calls, alerts you through Radar when a new call opens and helps you draft answers to application questions, which you copy into the PRODİS form yourself before you send the proposal.
Frequently asked questions
Is there an open TÜBİTAK 1507 call right now?
Yes. The 2026-2 call is open and, after TÜBİTAK's extension of November 9, 2026, closes on November 25, 2026, 23:59. Pre-registrations or updates that go to TÜBİTAK for approval are due by November 23, 2026, 23:59, and sending the proposal requires an approved pre-registration.
How much support can I get from 1507?
The project budget is capped at 3,500,000 TRY and the support rate is 75%, as a grant that is not repaid. It is paid period by period after you spend, over at most 18 months per project.
Can I apply to 1507 with a sole proprietorship?
No. Only SME-scale capital companies based in Türkiye can apply. The implementation rules exclude sole proprietorships and ordinary partnerships, as well as foundations, associations, cooperatives and limited-tax-liability branches of businesses based abroad.
When will I hear the result?
Proposals pass a preliminary review, a referee review and the technology group's board, and TÜBİTAK's Presidency approves the decision. The implementation rules aim for 60 days from a complete submission to the board's discussion, a target rather than a fixed date. A rejection comes with its reasons, and you can object to it.
Does getfund apply to 1507 for me?
No. Your company's PRODİS users prepare and send the proposal, and the authorized signatory approves with their own e-signature. getfund helps you find the TÜBİTAK calls that fit you, hear about new calls through Radar and draft answers to application questions.
Official sources
- TÜBİTAK: 1507 SME R&D Start-up Support Program page (Turkish) tubitak.gov.tr
- TÜBİTAK: 1507 2026-2 call text (with the extended calendar) tubitak.gov.tr
- TÜBİTAK announcement: 1507 and 1707 2026 calls extended (November 9, 2026) tubitak.gov.tr
- TÜBİTAK: 1507 2026 2nd call page tubitak.gov.tr
- TÜBİTAK: 1507 implementation rules (Uygulama Esasları) tubitak.gov.tr
- TÜBİTAK TEYDEB: Project proposal form guide for the 1501 and 1507 calls (AGY100/AGY101) tubitak.gov.tr
- TÜBİTAK: Financial matters and payment (Mali Hususlar ve Ödeme) tubitak.gov.tr
- TÜBİTAK TEYDEB: Company pre-registration user guide (Kuruluş Bazlı Ön Kayıt Kullanıcı Kılavuzu) tubitak.gov.tr
- TÜBİTAK TEYDEB: Frequently asked questions eteydeb.tubitak.gov.tr
- TÜBİTAK TEYDEB: Contacts eteydeb.tubitak.gov.tr