TÜBİTAK's 1501 Industrial R&D Projects Grant Programme (1501 Sanayi Ar-Ge Destek Programı) is a call-based TEYDEB programme that gives non-repayable grants to R&D projects of SME-scale capital companies in Türkiye. You apply in PRODİS during an open call, with an e-signature, once your company's PRODİS pre-registration is approved. This guide covers eligibility, support rates, the 2026 calls, the steps and the evaluation, using only TÜBİTAK's official pages and documents.
Who can apply?
According to TÜBİTAK's programme page and the 2026-2 call text, only SME-scale capital companies resident in Türkiye can apply to 1501. Sole proprietorships, ordinary partnerships, foundations, associations and their economic enterprises, cooperatives, unions, and Turkish branches and offices with limited tax liability of businesses whose legal and business seat is abroad cannot apply.
Size follows the SME regulation, and SMEs fill in an SME declaration (KOBİ Beyannamesi). If your company is an SME on the application date, its project stays supported even if it loses SME status during the support period. The implementation rules also open the door to large companies below a limit set by TÜBİTAK's Board, but the programme page and the 2026-2 call name only SMEs.
Several companies can submit one joint project; they need no commercial partnership, but each partner completes its own company pre-registration.
Sources: 1501 programme page: important points and who can apply; 1501 2026-2 call text, application process note; 1501 implementation rules, articles 15 and 17; Financial matters and payments page: SME declaration
How does 1501 differ from 1507?
The 1507 SME R&D Startup Grant Programme (1507 KOBİ Ar-Ge Başlangıç Destek Programı) is also SME-only. Its programme page says 1507 aims to support a company's first 5 projects, provided two of them are partnered; support lasts at most 18 months, the budget is at most 3,500,000 TRY and the rate is 75%. In 1501 the implementation rules set no limit on the number of projects (a call can set one), a project can run up to 36 months and TÜBİTAK's contribution can reach 20 million TRY per project.
TÜBİTAK says the two programmes open two calls each year, in January and July. In the 2026-2 round a company can send at most 2 proposals across both calls, and proposals you sent to 1501 2026-2 count toward that limit. The 1507 2026-2 call was extended: pre-registration closes on November 23, 2026, 23:59 and the call on November 25, 2026, 23:59.
Sources: 1507 programme page; 1501 implementation rules, articles 6 and 15; TÜBİTAK announcement: 1501 and 1507 2026 2nd calls (July 20, 2026); 1501 2026-2 call text, section 7; 1507 2026-2 call text (November 6, 2026), sections 6 and 7; TÜBİTAK announcement: 1507 and 1707 deadlines extended (November 9, 2026)
How much support you get and how long the project can run
The support is a grant and is not repaid. Since the 2026-2 calls the rate is tiered: 75% for the company's first 5 supported projects and 60% from the 6th on. TÜBİTAK's contribution is at most 20 million TRY per project; the English programme page says the project budget itself has no limit.
Projects with contracts signed since January 1, 2020 count toward the first 5; 1505, 1512/1812, 1831 and 1702 projects do not. The rate is written into the support scope and does not change during the project. The implementation rules cap it at 75% for SMEs and 60% for large companies.
Unless a call says otherwise, there is no topic restriction. Eligible costs: personnel, travel (economy-class transport only), equipment, software and publications, R&D services from R&D institutions in Türkiye, consultancy and other services from Türkiye or abroad, and materials and consumables. Projects with a budget above an amount set by the Board must submit an economic feasibility report.
Support lasts at most 36 months per project. The 2026-2 call accepted projects of up to 24 months; when work such as prototype or clinical tests needs more time, the period can be extended once, on the company's request and after evaluation, by at most 50% and to no more than 36 months.
Sources: TÜBİTAK announcement: 1501 and 1507 2026 2nd calls (July 20, 2026); 1501 2026-2 call text, sections 7 and 8; 1501 programme page: general information; 1501 implementation rules, articles 6, 7 and 18; TÜBİTAK 1501 programme page in English; Project proposal form guide: eligible costs
How payments work and whether you need a guarantee
The company spends first; support is paid after the evaluation. The year has two six-month periods, and for each one you send the R&D Aid Request Form (Ar-Ge Yardımı İstek Formu, AGY300) through PRODİS by the end of the second month after it. TÜBİTAK assigns a monitor; the support rate is applied to the accepted spending and the amount is paid into the bank account the company reported. The target is 90 days from a complete AGY300 to the notification of the amount.
Expenses must be paid through a bank. If the report is up to 30 days late, 1% of the accepted spending is deducted per day of delay, up to 30%; beyond 30 days the deduction is 30%. To be paid you must have no tax or social security (SGK) premium debt; any such debt can be offset against the support.
After TÜBİTAK signs the contract you can request an advance (transfer ödemesi) against a guarantee equal to the amount: letters of guarantee from banks and financial institutions, a surety letter or surety bond from an institution that gives credit guarantees, or a promissory note issued by the company. The advance cannot exceed 30% of the supported budget in the first period, or of the increased remaining budget later. Letters of guarantee and surety instruments must cover at least 24 months after the project ends, and no advance is paid when less than 3 months remain.
The programme page says support is not asked back if the project fails; for projects terminated because of the company's intent, payments are recovered with late interest. You can sell the project's output, but support is cut if you sell it to a public institution or body.
Sources: Project proposal form guide: support process; 1501 programme page: process and FAQ; 1501 implementation rules, articles 7, 28, 30, 32, 37, 38 and 46; Financial matters and payments page: payments; Financial report guide (version 01.04), sections 44 and 45
The 2026 calls and where things stand today
The 2026-1 call opened on January 1, 2026. After TÜBİTAK's update of February 23, 2026, the 1501 pre-registration deadline became April 9, 2026, 23:59 and the call closed on April 13, 2026, 23:59. The results were announced on September 4, 2026.
The 2026-2 call opened on July 20, 2026; pre-registration closed on October 22, 2026, 23:59 and the call on October 26, 2026, 23:59. The call is closed.
As of November 18, 2026 no new 1501 call has been announced: the calls list on TÜBİTAK's national support programmes page has no 1501 call, and the latest call document on the programme page is the 2026-2 one. TÜBİTAK says two calls open each year, in January and July; the date of the next call has not been announced yet.
Sources: TÜBİTAK announcement: 2026 1st calls open (January 1, 2026); TÜBİTAK announcement: 2026 1st calls calendar updated (February 23, 2026); TÜBİTAK announcement: 1501 2026 1st call results (September 4, 2026); 1501 2026-2 call text, section 6 (call calendar); TÜBİTAK announcement in English: 1501 and 1507 2026 2nd calls; TÜBİTAK announcement: 1501 and 1507 2026 2nd calls (July 20, 2026); TÜBİTAK national support programmes page: calls; 1501 programme page: call document
First: the PRODİS company pre-registration
To send a proposal, your company needs an approved company pre-registration (kuruluş bazlı ön kayıt) in PRODİS; in a joint project each partner registers separately. You can pre-register at any time, without waiting for a call.
Since November 2, 2026 the pre-registration is fully online and no printed documents go to TÜBİTAK; companies registered earlier must also update their details. Approvals are given with an e-signature, so the authorized signatory needs one. getfund's TÜBİTAK PRODİS company pre-registration guide walks through every step.
Sources: 1501 implementation rules, article 18; 1501 2026-2 call text, section 6 and application process note; TEYDEB announcement: online pre-registration (November 2, 2026)
Step by step: the project application
1. Log in to PRODİS at eteydeb.tubitak.gov.tr with the company user role, use “Yeni Proje Önerisi Tanımla” (define a new proposal), type the project name, choose the programme and save. Until you press “Gönder” (send), the proposal is a draft and you have not applied.
2. Fill in section A1 of the proposal form and send it to your authorized signatory for e-signature approval.
3. After the approval, complete the other sections. The sample proposal form linked in the call text is only for drafting; you cannot apply with it.
4. Send the proposal with “TÜBİTAK'a Gönder” (send to TÜBİTAK) before the call closes; this needs an approved pre-registration. Proposals are sent with an e-signature, so renew yours if it expires before the closing date. TÜBİTAK charges no fee at any stage of the application.
Sources: 1501 2026-2 call text, section 6 and application process note; TEYDEB FAQ: preparing a proposal; Project proposal form guide: preliminary information (fees)
What the proposal form asks
The project proposal form, prepared under TÜBİTAK's AGY100/AGY101 guide, asks for project and company information, the industrial R&D content, technology level and innovative aspects, the project plan and company infrastructure, the potential to turn into economic benefit and national gain, risk and financing management, the budget and annexes.
Section A.3, the short project introduction, is shown unchanged at the Executive Committee meeting that decides on the proposal, so the guide recommends writing it last. Section B is decisive: projects without technological innovation and R&D are not supported. You declare costs on the cost forms M011 to M016, excluding VAT, and the work-time bar chart must fit on one page.
The project leader and all staff with a graduate degree must be registered in ARBİS at arbis.tubitak.gov.tr. The guide asks for short, plain wording and a clear account of your company's own R&D contribution.
Source: Project proposal form guide for the 1501 and 1507 calls (September 2024)
How evaluation works and how long it takes
A project technical expert first runs a pre-evaluation, and a proposal adequate in content and form goes to reviewers. If one of the critical findings listed in the call is made, the project can be rejected without going to reviewers.
Reviewers are generally university academics, and they assess three dimensions: the industrial R&D content, technology level and innovative aspects; the fit of the project plan and company infrastructure; and the potential of the outputs to turn into economic benefit and national gain. For BİLTEG (Information Technologies Group) projects reviewers meet the company online or visit, as the company prefers; for other projects they visit on site.
In 2026-2 the committee evaluation threshold was 60 points; a project whose average reviewer score was at or below it in any dimension was rejected. Projects above it could earn extra points: -5 to 5 for the commercialization performance of past TÜBİTAK projects, and 5 for projects under the “Endüstride Teknolojik Sıçrama” (technological leap in industry) or “Dijital Liderlik” (digital leadership) headings of the 2026-2028 priority topics.
The decision is formed in the executive committee of the project's technology group, weighing the project scores and the call budget, and is approved by TÜBİTAK's Presidency and notified to the company. A supported project receives a support decision letter and contract; if you do not sign and return the contract in the given time, the decision can be cancelled. A rejection comes with its reasons, and you can object to it.
The implementation rules target 90 days from the complete submission of a proposal to its discussion in the committee. The 2026-1 call closed on April 13, 2026 and its results were announced on September 4, 2026. You see your status on the project information page in PRODİS.
Sources: 1501 implementation rules, articles 20, 25, 26 and 27; 1501 2026-2 call text, sections 5 and 7; 1501 programme page: evaluation; Project proposal form guide: reviewer evaluation; TEYDEB contact page: technology groups; TÜBİTAK announcement: 2026 1st calls calendar updated (February 23, 2026); TÜBİTAK announcement: 1501 2026 1st call results (September 4, 2026)
What gets an application rejected or delayed
Under the 2026-2 call text, a project can be rejected without reviewer evaluation if one of these findings is made.
The R&D was completed before the application and no technical problem is left to solve; or the company's own R&D contribution is none or limited and the service provider will do the work.
The project is investment-heavy production infrastructure, routine work or behind current technology; or its output cannot turn into economic benefit or cannot be realized and used.
On the application date the team has no company employee with at least a bachelor's degree related to the project's subject; for graduates of other fields, experience described in their CVs is also weighed.
A rejected proposal is sent again without changes addressing the rejection reasons; the information is too thin to evaluate; or the budget does not match the R&D work and is unrealistic.
What causes delays: if you do not make a revision requested at pre-evaluation in the given time, the proposal can go straight to the committee with a rejection recommendation. Under the form guide, evaluation does not start at all if the information lacks enough detail. A proposal cannot be sent without an approved pre-registration, and you must renew your e-signature if it expires before the call closes.
Sources: 1501 2026-2 call text, sections 5 and 6; 1501 implementation rules, article 20; Project proposal form guide: application process
If you get stuck: TÜBİTAK contact addresses
For the application process and system, the call text and the programme page give 1501@tubitak.gov.tr; for the priority R&D and innovation topics, the call text gives cagri.planlama@tubitak.gov.tr. For project-specific or technical questions, the programme page points you to the relevant technology group on TEYDEB's contact page, for example bilteg.teydeb@tubitak.gov.tr for the Information Technologies Group (BİLTEG).
Write to prodis@tubitak.gov.tr about technical problems with the PRODİS software, to teydeb.onkayit@tubitak.gov.tr about the pre-registration and to teydeb.eimzadestek@tubitak.gov.tr about getting an e-signature. TÜBİTAK's call center is 444 66 90.
Sources: 1501 2026-2 call text, section 10; 1501 programme page: contact; TEYDEB contact page: technology groups and call center; TEYDEB frequently asked questions
How getfund helps
getfund does not apply to 1501 for you: your company's PRODİS users prepare the pre-registration and the proposal, the authorized signatory approves with their own e-signature, and you send the proposal yourself.
getfund matches your startup profile against open TÜBİTAK calls, alerts you through Radar when a new 1501 call opens and helps you draft answers to application questions, which you copy into the PRODİS form yourself.
Frequently asked questions
Can I apply to 1501 right now?
No. The 1501 2026-2 call closed on October 26, 2026, 23:59, and as of November 18, 2026 no new 1501 call has been announced. Meanwhile you can complete your company pre-registration in PRODİS, since it does not have to wait for a call.
Can I apply to 1501 with a sole proprietorship?
No. Only SME-scale capital companies resident in Türkiye can apply to 1501; sole proprietorships and ordinary partnerships cannot. To apply you need a capital company and an approved company pre-registration in PRODİS.
How much grant can I get from 1501?
The grant is 75% of accepted spending on the company's first 5 supported projects and 60% from the 6th on, and TÜBİTAK's contribution is at most 20 million TRY per project. Support is paid after you spend and submit the period report, and you can request an advance against a guarantee.
Do I repay the grant if the project fails?
No, according to TÜBİTAK's programme page: support is not asked back if the project fails. For projects terminated because of the company's intent, payments are recovered with late interest.
Does getfund apply to 1501 for me?
No. Your company's PRODİS users prepare the company pre-registration and the proposal, the authorized signatory approves with their own e-signature, and you send the proposal. getfund helps you find the TÜBİTAK calls that fit you, hear about new calls through Radar and draft answers to application questions.
Official sources
- TÜBİTAK: 1501 Industrial R&D Projects Grant Programme page (Turkish) tubitak.gov.tr
- TÜBİTAK: 1501 programme 2026 2nd call text tubitak.gov.tr
- TÜBİTAK: 1501 programme implementation rules (Uygulama Esasları) tubitak.gov.tr
- TÜBİTAK announcement: 1501 and 1507 2026 2nd calls open (July 20, 2026) tubitak.gov.tr
- TÜBİTAK announcement: 1501 2026 1st call results (September 4, 2026) tubitak.gov.tr
- TÜBİTAK TEYDEB: Project proposal form guide for the 1501 and 1507 calls tubitak.gov.tr
- TÜBİTAK: Financial matters and payments (Mali Hususlar ve Ödeme) tubitak.gov.tr
- TÜBİTAK TEYDEB: Financial report guide (Mali Rapor Hazırlama Kılavuzu) tubitak.gov.tr
- TÜBİTAK TEYDEB: Contacts eteydeb.tubitak.gov.tr
- TÜBİTAK TEYDEB: Frequently asked questions eteydeb.tubitak.gov.tr